BRNFB - 30-51XX EPOXY LATEX FLOOR PAINT
- MSDS: BRNFB
- Manufacturer: NUBRITE CHEM CO KYANIZE PAINT
- Product Name: 30-51XX EPOXY LATEX FLOOR PAINT
- National Stock Number: 8010-00N042705
Product Identification
Product ID:30-51XX EPOXY LATEX FLOOR PAINT
MSDS Date:10/21/1991
FSC:8010
NIIN:00N042705
MSDS Number: BRNFB
Responsible Party
EVERETT, MA 02149
US
Emergency Phone: 800-225-3530;800-424-9300(CHEMTREC)
Info Phone: 617-387-5000
Cage: IO381
Contractor
Telephone: 617-387-5000
Cage: IO381
Ingredients
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS
CAS: 14807-96-6
RTECS: MW2700000
OSHA PEL 2 MG/M3 RESP
ACGIH TLV: 2 MG/M3 RESP
PIGMENTS
OSHA PEL N/K
ACGIH TLV: N/K
0.1@20C
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 2.45%
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM,(VAP/MIST),C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15 MG/M3 TDUST;5RESP
ACGIH TLV: 10 MG/M3 TDUST
CLAYS (KAOLIN)
CAS: 1332-58-7
RTECS: GF1670500
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: ADVERSE HEALTH EFFECTS FROM
VAPORS OR SPRAY MIST IN POORLY VENTILATED AREAS MAY INCLUDE
IRRITATION OF MUCOUS MEMBRANES. PROLONGED CONTACT WITH SKIN/EYES
CAUSE IRRITATION. CHRONIC: UNKNOWN-TREAT ED AS A MIXTURE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. EYES: PROMPTLY & THOROUGHLY WASH
EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES AND CONSULT PHYS
IF IRRITATION PERSISTS. SKIN: WASH THOROUGHLY WITH SOAP AND WATER.
INGES : CALL A PHYSICIAN.
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:ANY CONVENTIONAL METHOD. MEDIA SUITABLE FOR
SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:PRODUCT WILL NOT BURN BUT MAY SPATTER IF
TEMP EXCEEDS BOILING POINT. POLYMER FILMS ARE CAPABLE OF BURNING.
GIVING OFF OXIDES OF CARBON/NITROGEN.
Accidental Release
Spill Release Procedures:DIKE AND CONTAIN SPILL WITH INERT MATERIAL,
SAND ETC. KEEP SPILLS AWAY FROM STREAMS AND WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT FREEZE. STORAGE TEMP 120F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD DUST MASK. PROD CNTNS
CALCIUM CARBONATE, CLAYS, TALCS/OTHER PIGMENTS CLASSED BY ACGIH AS
NUISANCE DUST. EXPOS TO MISTS/DUSTS SHOULD BE CONTROLLED BELOW 10
MG/M3 THRU USAGE OF NIO SH/MSHA APPRVD DUST FILTER RESP.
Ventilation:USE LOCAL EXHAUST.
Protective Gloves:WATERPROOF.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE CHEMICAL RESISTANT APRON IF NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>193F,>89C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.38
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:35-75
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:CONVENTIONAL METHODS IN COMPLIANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.